diff --git a/services/gestion/domaines.php b/services/gestion/domaines.php
new file mode 100644
index 0000000..3340a62
--- /dev/null
+++ b/services/gestion/domaines.php
@@ -0,0 +1,13 @@
+
+
+
+
+
+
diff --git a/services/gestion/listes_noires.php b/services/gestion/listes_noires.php
new file mode 100644
index 0000000..3340a62
--- /dev/null
+++ b/services/gestion/listes_noires.php
@@ -0,0 +1,13 @@
+
+
+
+
+
+
diff --git a/services/utilisateurs/identification.php b/services/utilisateurs/identification.php
index 4f22e3a..9531d99 100644
--- a/services/utilisateurs/identification.php
+++ b/services/utilisateurs/identification.php
@@ -1,4 +1,5 @@
Déconnexion";
-
- if (isset($_SESSION['identifiant_utilisateur']) && !empty($_SESSION['identifiant_utilisateur']) && $_SESSION['privilege_utilisateur']=="administrateur"){
- //header ("location: /pages/form_c2r.php");
- echo "Administrateur";
+ if (isset($_SESSION['identifiant_utilisateur']) && !empty($_SESSION['identifiant_utilisateur']) && $_SESSION['privilege_utilisateur']=="administrateur") {
+ header ("location: /pages/gestion/administration.php?message=bienvenue&page=alias");
die();
}
- elseif (isset($_SESSION['identifiant_utilisateur']) && !empty($_SESSION['identifiant_utilisateur']) && $_SESSION['privilege_utilisateur']=="utilisateur"){
- //header ("location: /pages/mon_compte/gestion.php");
- echo "Utilisateur";
+ elseif (isset($_SESSION['identifiant_utilisateur']) && !empty($_SESSION['identifiant_utilisateur']) && $_SESSION['privilege_utilisateur']=="utilisateur") {
+ header ("location: /pages/gestion/administration.php?message=bienvenue&page=alias");
die();
}
else {
diff --git a/services/utilisateurs/privileges.php b/services/utilisateurs/privileges.php
new file mode 100644
index 0000000..e37022d
--- /dev/null
+++ b/services/utilisateurs/privileges.php
@@ -0,0 +1,19 @@
+
diff --git a/utilisateurs.sql b/utilisateurs.sql
new file mode 100644
index 0000000..9ecae50
--- /dev/null
+++ b/utilisateurs.sql
@@ -0,0 +1,24 @@
+sqlite3 /etc/postfix/postfix.sqlite
+
+CREATE TABLE IF NOT EXISTS postfix_utilisateurs (
+ id INTEGER PRIMARY KEY AUTOINCREMENT,
+ utilisateur TEXT NOT NULL UNIQUE,
+ mot_de_passe TEXT NOT NULL,
+ nom_complet TEXT,
+ uid INTEGER NOT NULL,
+ gid INTEGER NOT NULL,
+ privilege TEXT NOT NULL,
+ active INTEGER
+);
+
+INSERT INTO postfix_utilisateurs (utilisateur,mot_de_passe,nom_complet,uid,gid,privilege,active) VALUES ("toto","toto","Yohan Charbi",5000,5000,"administrateur",1);
+
+INSERT INTO postfix_utilisateurs (utilisateur,mot_de_passe,nom_complet,uid,gid,privilege, active) VALUES ("tata", "tata", "Nicolos Morin", 5000, 5000, "utilisateur", 1);
+
+UPDATE postfix_utilisateurs SET nom_complet="Nicolas Morin" WHERE id=2;
+
+CREATE TABLE IF NOT EXISTS tests (
+ id INTEGER PRIMARY KEY AUTOINCREMENT,
+ utilisateur TEXT NOT NULL UNIQUE,
+ mot_de_passe TEXT NOT NULL
+);
--
2.30.2
From ffb41d66159160b23c8fdaff68b27711eeba3dda Mon Sep 17 00:00:00 2001
From: ycharbi
Date: Thu, 20 May 2021 18:35:21 +0200
Subject: [PATCH 09/75] Activation de l'authentification
---
pages/gestion/administration.php | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/pages/gestion/administration.php b/pages/gestion/administration.php
index e28c351..bb830e1 100644
--- a/pages/gestion/administration.php
+++ b/pages/gestion/administration.php
@@ -3,8 +3,8 @@
/**
* Page centrale de gestion des fonctionnalités du serveur de courriel.
*/
-//session_start();
-//require_once($_SERVER["DOCUMENT_ROOT"]."/inclusions/entete.php");
+session_start();
+require_once($_SERVER["DOCUMENT_ROOT"]."/inclusions/entete.php");
require_once($_SERVER["DOCUMENT_ROOT"]."/inclusions/barre_menu.php");
require_once($_SERVER["DOCUMENT_ROOT"]."/services/utilisateurs/privileges.php");
testPrivileges();
--
2.30.2
From f5dca6af67fc18f06b6d5b3e0fc360a9e4ebb5b4 Mon Sep 17 00:00:00 2001
From: Nicolas MORIN
Date: Thu, 20 May 2021 19:03:24 +0200
Subject: [PATCH 10/75] Modification du Dockerfile pour partir d'une image
Debian
---
Dockerfile | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/Dockerfile b/Dockerfile
index 9a294d0..a657000 100644
--- a/Dockerfile
+++ b/Dockerfile
@@ -1,6 +1,11 @@
-FROM php:7.4-apache
-RUN apt update && apt install -y --no-install-recommends sqlite3 git && apt clean && rm -rf /var/lib/apt/lists/*
-RUN mkdir -p /etc/postfix/
+FROM debian:testing
+RUN apt update -y && apt install -y --no-install-recommends apache2 php libapache2-mod-php sqlite3 && \
+apt clean && \
+rm -rf /var/lib/apt/lists/* && \
+mkdir -p /etc/postfix/ && \
+rm /var/www/html/index.html
COPY . /var/www/html/
-RUN chmod +x /var/www/html/outils/genenv.sh
-RUN /var/www/html/outils/genenv.sh
+RUN chmod +x /var/www/html/outils/genenv.sh && \
+/var/www/html/outils/genenv.sh
+
+CMD /usr/sbin/apachectl -D FOREGROUND
--
2.30.2
From 13855ba658e86c4a6e96529c627926ca30729abf Mon Sep 17 00:00:00 2001
From: Nicolas MORIN
Date: Thu, 20 May 2021 19:16:00 +0200
Subject: [PATCH 11/75] Ajout du paquet php-sqlite3 dans l'image Docker
---
Dockerfile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Dockerfile b/Dockerfile
index a657000..c27903b 100644
--- a/Dockerfile
+++ b/Dockerfile
@@ -1,5 +1,5 @@
FROM debian:testing
-RUN apt update -y && apt install -y --no-install-recommends apache2 php libapache2-mod-php sqlite3 && \
+RUN apt update -y && apt install -y --no-install-recommends apache2 php libapache2-mod-php sqlite3 php-sqlite3 && \
apt clean && \
rm -rf /var/lib/apt/lists/* && \
mkdir -p /etc/postfix/ && \
--
2.30.2
From 682a100e6b15566197be21dd9111388ca27b347e Mon Sep 17 00:00:00 2001
From: Nicolas MORIN
Date: Thu, 20 May 2021 19:40:52 +0200
Subject: [PATCH 12/75] Configuration de Apache et PHP dans le dossier conf
---
Dockerfile | 4 +-
outils/conf/apache2.conf | 227 +++++
outils/conf/php.ini | 1947 ++++++++++++++++++++++++++++++++++++++
3 files changed, 2177 insertions(+), 1 deletion(-)
create mode 100644 outils/conf/apache2.conf
create mode 100644 outils/conf/php.ini
diff --git a/Dockerfile b/Dockerfile
index c27903b..a818e6f 100644
--- a/Dockerfile
+++ b/Dockerfile
@@ -5,7 +5,9 @@ rm -rf /var/lib/apt/lists/* && \
mkdir -p /etc/postfix/ && \
rm /var/www/html/index.html
COPY . /var/www/html/
-RUN chmod +x /var/www/html/outils/genenv.sh && \
+RUN mv /var/www/html/outils/conf/php.ini /etc/php/7.4/apache2 && \
+mv /var/www/html/outils/conf/apache2.conf /etc/apache2/ && \
+chmod +x /var/www/html/outils/genenv.sh && \
/var/www/html/outils/genenv.sh
CMD /usr/sbin/apachectl -D FOREGROUND
diff --git a/outils/conf/apache2.conf b/outils/conf/apache2.conf
new file mode 100644
index 0000000..e948b5f
--- /dev/null
+++ b/outils/conf/apache2.conf
@@ -0,0 +1,227 @@
+# This is the main Apache server configuration file. It contains the
+# configuration directives that give the server its instructions.
+# See http://httpd.apache.org/docs/2.4/ for detailed information about
+# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
+# hints.
+#
+#
+# Summary of how the Apache 2 configuration works in Debian:
+# The Apache 2 web server configuration in Debian is quite different to
+# upstream's suggested way to configure the web server. This is because Debian's
+# default Apache2 installation attempts to make adding and removing modules,
+# virtual hosts, and extra configuration directives as flexible as possible, in
+# order to make automating the changes and administering the server as easy as
+# possible.
+
+# It is split into several files forming the configuration hierarchy outlined
+# below, all located in the /etc/apache2/ directory:
+#
+# /etc/apache2/
+# |-- apache2.conf
+# | `-- ports.conf
+# |-- mods-enabled
+# | |-- *.load
+# | `-- *.conf
+# |-- conf-enabled
+# | `-- *.conf
+# `-- sites-enabled
+# `-- *.conf
+#
+#
+# * apache2.conf is the main configuration file (this file). It puts the pieces
+# together by including all remaining configuration files when starting up the
+# web server.
+#
+# * ports.conf is always included from the main configuration file. It is
+# supposed to determine listening ports for incoming connections which can be
+# customized anytime.
+#
+# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
+# directories contain particular configuration snippets which manage modules,
+# global configuration fragments, or virtual host configurations,
+# respectively.
+#
+# They are activated by symlinking available configuration files from their
+# respective *-available/ counterparts. These should be managed by using our
+# helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
+# their respective man pages for detailed information.
+#
+# * The binary is called apache2. Due to the use of environment variables, in
+# the default configuration, apache2 needs to be started/stopped with
+# /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
+# work with the default configuration.
+
+
+# Global configuration
+#
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# NOTE! If you intend to place this on an NFS (or otherwise network)
+# mounted filesystem then please read the Mutex documentation (available
+# at );
+# you will save yourself a lot of trouble.
+#
+# Do NOT add a slash at the end of the directory path.
+#
+#ServerRoot "/etc/apache2"
+
+#
+# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
+#
+#Mutex file:${APACHE_LOCK_DIR} default
+
+#
+# The directory where shm and other runtime files will be stored.
+#
+
+DefaultRuntimeDir ${APACHE_RUN_DIR}
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+# This needs to be set in /etc/apache2/envvars
+#
+PidFile ${APACHE_PID_FILE}
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 300
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive On
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 5
+
+
+# These need to be set in /etc/apache2/envvars
+User ${APACHE_RUN_USER}
+Group ${APACHE_RUN_GROUP}
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a
+# container, error messages relating to that virtual host will be
+# logged here. If you *do* define an error logfile for a
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog ${APACHE_LOG_DIR}/error.log
+
+#
+# LogLevel: Control the severity of messages logged to the error_log.
+# Available values: trace8, ..., trace1, debug, info, notice, warn,
+# error, crit, alert, emerg.
+# It is also possible to configure the log level for particular modules, e.g.
+# "LogLevel info ssl:warn"
+#
+LogLevel warn
+
+# Include module configuration:
+IncludeOptional mods-enabled/*.load
+IncludeOptional mods-enabled/*.conf
+
+# Include list of ports to listen on
+Include ports.conf
+
+
+# Sets the default security model of the Apache2 HTTPD server. It does
+# not allow access to the root filesystem outside of /usr/share and /var/www.
+# The former is used by web applications packaged in Debian,
+# the latter may be used for local directories served by the web server. If
+# your system is serving content from a sub-directory in /srv you must allow
+# access here, or in any related virtual host.
+
+ Options FollowSymLinks
+ AllowOverride None
+ Require all denied
+
+
+
+ AllowOverride None
+ Require all granted
+
+
+
+ Options Indexes FollowSymLinks
+ AllowOverride all
+ Require all granted
+
+
+#
+# Options Indexes FollowSymLinks
+# AllowOverride None
+# Require all granted
+#
+
+
+
+
+# AccessFileName: The name of the file to look for in each directory
+# for additional configuration directives. See also the AllowOverride
+# directive.
+#
+AccessFileName .htaccess
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being
+# viewed by Web clients.
+#
+
+ Require all denied
+
+
+
+#
+# The following directives define some format nicknames for use with
+# a CustomLog directive.
+#
+# These deviate from the Common Log Format definitions in that they use %O
+# (the actual bytes sent including headers) instead of %b (the size of the
+# requested file), because the latter makes it impossible to detect partial
+# requests.
+#
+# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
+# Use mod_remoteip instead.
+#
+LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
+LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %O" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+
+# Include of directories ignores editors' and dpkg's backup files,
+# see README.Debian for details.
+
+# Include generic snippets of statements
+IncludeOptional conf-enabled/*.conf
+
+# Include the virtual host configurations:
+IncludeOptional sites-enabled/*.conf
+
+# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
diff --git a/outils/conf/php.ini b/outils/conf/php.ini
new file mode 100644
index 0000000..929c24a
--- /dev/null
+++ b/outils/conf/php.ini
@@ -0,0 +1,1947 @@
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About php.ini ;
+;;;;;;;;;;;;;;;;;;;
+; PHP's initialization file, generally called php.ini, is responsible for
+; configuring many of the aspects of PHP's behavior.
+
+; PHP attempts to find and load this configuration from a number of locations.
+; The following is a summary of its search order:
+; 1. SAPI module specific location.
+; 2. The PHPRC environment variable. (As of PHP 5.2.0)
+; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
+; 4. Current working directory (except CLI)
+; 5. The web server's directory (for SAPI modules), or directory of PHP
+; (otherwise in Windows)
+; 6. The directory from the --with-config-file-path compile time option, or the
+; Windows directory (usually C:\windows)
+; See the PHP docs for more specific information.
+; http://php.net/configuration.file
+
+; The syntax of the file is extremely simple. Whitespace and lines
+; beginning with a semicolon are silently ignored (as you probably guessed).
+; Section headers (e.g. [Foo]) are also silently ignored, even though
+; they might mean something in the future.
+
+; Directives following the section heading [PATH=/www/mysite] only
+; apply to PHP files in the /www/mysite directory. Directives
+; following the section heading [HOST=www.example.com] only apply to
+; PHP files served from www.example.com. Directives set in these
+; special sections cannot be overridden by user-defined INI files or
+; at runtime. Currently, [PATH=] and [HOST=] sections only work under
+; CGI/FastCGI.
+; http://php.net/ini.sections
+
+; Directives are specified using the following syntax:
+; directive = value
+; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
+; Directives are variables used to configure PHP or PHP extensions.
+; There is no name validation. If PHP can't find an expected
+; directive because it is not set or is mistyped, a default value will be used.
+
+; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
+; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
+; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
+; previously set variable or directive (e.g. ${foo})
+
+; Expressions in the INI file are limited to bitwise operators and parentheses:
+; | bitwise OR
+; ^ bitwise XOR
+; & bitwise AND
+; ~ bitwise NOT
+; ! boolean NOT
+
+; Boolean flags can be turned on using the values 1, On, True or Yes.
+; They can be turned off using the values 0, Off, False or No.
+
+; An empty string can be denoted by simply not writing anything after the equal
+; sign, or by using the None keyword:
+
+; foo = ; sets foo to an empty string
+; foo = None ; sets foo to an empty string
+; foo = "None" ; sets foo to the string 'None'
+
+; If you use constants in your value, and these constants belong to a
+; dynamically loaded extension (either a PHP extension or a Zend extension),
+; you may only use these constants *after* the line that loads the extension.
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+; PHP comes packaged with two INI files. One that is recommended to be used
+; in production environments and one that is recommended to be used in
+; development environments.
+
+; php.ini-production contains settings which hold security, performance and
+; best practices at its core. But please be aware, these settings may break
+; compatibility with older or less security conscience applications. We
+; recommending using the production ini in production and testing environments.
+
+; php.ini-development is very similar to its production variant, except it is
+; much more verbose when it comes to errors. We recommend using the
+; development version only in development environments, as errors shown to
+; application users can inadvertently leak otherwise secure information.
+
+; This is the php.ini-production INI file.
+
+;;;;;;;;;;;;;;;;;;;
+; Quick Reference ;
+;;;;;;;;;;;;;;;;;;;
+; The following are all the settings which are different in either the production
+; or development versions of the INIs with respect to PHP's default behavior.
+; Please see the actual settings later in the document for more details as to why
+; we recommend these changes in PHP's behavior.
+
+; display_errors
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+
+; display_startup_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+
+; error_reporting
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; log_errors
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+
+; max_input_time
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+
+; output_buffering
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+
+; register_argc_argv
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; request_order
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+
+; session.gc_divisor
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+
+; session.sid_bits_per_character
+; Default Value: 4
+; Development Value: 5
+; Production Value: 5
+
+; short_open_tag
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+
+; variables_order
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS"
+
+;;;;;;;;;;;;;;;;;;;;
+; php.ini Options ;
+;;;;;;;;;;;;;;;;;;;;
+; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
+;user_ini.filename = ".user.ini"
+
+; To disable this feature set this option to an empty value
+;user_ini.filename =
+
+; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
+;user_ini.cache_ttl = 300
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+; http://php.net/engine
+engine = On
+
+; This directive determines whether or not PHP will recognize code between
+; and ?> tags as PHP source which should be processed as such. It is
+; generally recommended that should be used and that this feature
+; should be disabled, as enabling it may result in issues when generating XML
+; documents, however this remains supported for backward compatibility reasons.
+; Note that this directive does not control the = shorthand tag, which can be
+; used regardless of this directive.
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/short-open-tag
+short_open_tag = Off
+
+; The number of significant digits displayed in floating point numbers.
+; http://php.net/precision
+precision = 14
+
+; Output buffering is a mechanism for controlling how much output data
+; (excluding headers and cookies) PHP should keep internally before pushing that
+; data to the client. If your application's output exceeds this setting, PHP
+; will send that data in chunks of roughly the size you specify.
+; Turning on this setting and managing its maximum buffer size can yield some
+; interesting side-effects depending on your application and web server.
+; You may be able to send headers and cookies after you've already sent output
+; through print or echo. You also may see performance benefits if your server is
+; emitting less packets due to buffered output versus PHP streaming the output
+; as it gets it. On production servers, 4096 bytes is a good setting for performance
+; reasons.
+; Note: Output buffering can also be controlled via Output Buffering Control
+; functions.
+; Possible Values:
+; On = Enabled and buffer is unlimited. (Use with caution)
+; Off = Disabled
+; Integer = Enables the buffer and sets its maximum size in bytes.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; Default Value: Off
+; Development Value: 4096
+; Production Value: 4096
+; http://php.net/output-buffering
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function. For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+; directive. Instead, explicitly set the output handler using ob_start().
+; Using this ini directive may cause problems unless you know what script
+; is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
+; Note: output_handler must be empty if this is set 'On' !!!!
+; Instead you must use zlib.output_handler.
+; http://php.net/output-handler
+;output_handler =
+
+; URL rewriter function rewrites URL on the fly by using
+; output buffer. You can set target tags by this configuration.
+; "form" tag is special tag. It will add hidden input tag to pass values.
+; Refer to session.trans_sid_tags for usage.
+; Default Value: "form="
+; Development Value: "form="
+; Production Value: "form="
+;url_rewriter.tags
+
+; URL rewriter will not rewrite absolute URL nor form by default. To enable
+; absolute URL rewrite, allowed hosts must be defined at RUNTIME.
+; Refer to session.trans_sid_hosts for more details.
+; Default Value: ""
+; Development Value: ""
+; Production Value: ""
+;url_rewriter.hosts
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP
+; outputs chunks that are few hundreds bytes each as a result of
+; compression. If you prefer a larger chunk size for better
+; performance, enable output_buffering in addition.
+; Note: You need to use zlib.output_handler instead of the standard
+; output_handler, or otherwise the output will be corrupted.
+; http://php.net/zlib.output-compression
+zlib.output_compression = Off
+
+; http://php.net/zlib.output-compression-level
+;zlib.output_compression_level = -1
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+; http://php.net/zlib.output-handler
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block. This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block. Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+; http://php.net/implicit-flush
+; Note: This directive is hardcoded to On for the CLI SAPI
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instantiated. A warning appears if the specified function is
+; not defined, or if the function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a
+; callback-function.
+unserialize_callback_func =
+
+; The unserialize_max_depth specifies the default depth limit for unserialized
+; structures. Setting the depth limit too high may result in stack overflows
+; during unserialization. The unserialize_max_depth ini setting can be
+; overridden by the max_depth option on individual unserialize() calls.
+; A value of 0 disables the depth limit.
+;unserialize_max_depth = 4096
+
+; When floats & doubles are serialized, store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+; The value is also used for json_encode when encoding double values.
+; If -1 is used, then dtoa mode 0 is used which automatically select the best
+; precision.
+serialize_precision = -1
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below. This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file.
+; Note: disables the realpath cache
+; http://php.net/open-basedir
+;open_basedir =
+
+; This directive allows you to disable certain functions.
+; It receives a comma-delimited list of function names.
+; http://php.net/disable-functions
+disable_functions = pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wifcontinued,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_get_handler,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,pcntl_async_signals,pcntl_unshare,
+
+; This directive allows you to disable certain classes.
+; It receives a comma-delimited list of class names.
+; http://php.net/disable-classes
+disable_classes =
+
+; Colors for Syntax Highlighting mode. Anything that's acceptable in
+; would work.
+; http://php.net/syntax-highlighting
+;highlight.string = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.default = #0000BB
+;highlight.html = #000000
+
+; If enabled, the request will be allowed to complete even if the user aborts
+; the request. Consider enabling it if executing long requests, which may end up
+; being interrupted by the user or a browser timing out. PHP's default behavior
+; is to disable this feature.
+; http://php.net/ignore-user-abort
+;ignore_user_abort = On
+
+; Determines the size of the realpath cache to be used by PHP. This value should
+; be increased on systems where PHP opens many files to reflect the quantity of
+; the file operations performed.
+; Note: if open_basedir is set, the cache is disabled
+; http://php.net/realpath-cache-size
+;realpath_cache_size = 4096k
+
+; Duration of time, in seconds for which to cache realpath information for a given
+; file or directory. For systems with rarely changing files, consider increasing this
+; value.
+; http://php.net/realpath-cache-ttl
+;realpath_cache_ttl = 120
+
+; Enables or disables the circular reference collector.
+; http://php.net/zend.enable-gc
+zend.enable_gc = On
+
+; If enabled, scripts may be written in encodings that are incompatible with
+; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
+; encodings. To use this feature, mbstring extension must be enabled.
+; Default: Off
+;zend.multibyte = Off
+
+; Allows to set the default encoding for the scripts. This value will be used
+; unless "declare(encoding=...)" directive appears at the top of the script.
+; Only affects if zend.multibyte is set.
+; Default: ""
+;zend.script_encoding =
+
+; Allows to include or exclude arguments from stack traces generated for exceptions.
+; In production, it is recommended to turn this setting on to prohibit the output
+; of sensitive information in stack traces
+; Default: Off
+zend.exception_ignore_args = On
+
+;;;;;;;;;;;;;;;;;
+; Miscellaneous ;
+;;;;;;;;;;;;;;;;;
+
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header). It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+; http://php.net/expose-php
+expose_php = Off
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+; Maximum execution time of each script, in seconds
+; http://php.net/max-execution-time
+; Note: This directive is hardcoded to 0 for the CLI SAPI
+max_execution_time = 30
+
+; Maximum amount of time each script may spend parsing request data. It's a good
+; idea to limit this time on productions servers in order to eliminate unexpectedly
+; long running scripts.
+; Note: This directive is hardcoded to -1 for the CLI SAPI
+; Default Value: -1 (Unlimited)
+; Development Value: 60 (60 seconds)
+; Production Value: 60 (60 seconds)
+; http://php.net/max-input-time
+max_input_time = 60
+
+; Maximum input variable nesting level
+; http://php.net/max-input-nesting-level
+;max_input_nesting_level = 64
+
+; How many GET/POST/COOKIE input variables may be accepted
+;max_input_vars = 1000
+
+; Maximum amount of memory a script may consume
+; http://php.net/memory-limit
+memory_limit = 128M
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; This directive informs PHP of which errors, warnings and notices you would like
+; it to take action for. The recommended way of setting values for this
+; directive is through the use of the error level constants and bitwise
+; operators. The error level constants are below here for convenience as well as
+; some common settings and their meanings.
+; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
+; those related to E_NOTICE and E_STRICT, which together cover best practices and
+; recommended coding standards in PHP. For performance reasons, this is the
+; recommend error reporting setting. Your production server shouldn't be wasting
+; resources complaining about best practices and coding standards. That's what
+; development servers and development settings are for.
+; Note: The php.ini-development file has this setting as E_ALL. This
+; means it pretty much reports everything which is exactly what you want during
+; development and early testing.
+;
+; Error Level Constants:
+; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
+; E_ERROR - fatal run-time errors
+; E_RECOVERABLE_ERROR - almost fatal run-time errors
+; E_WARNING - run-time warnings (non-fatal errors)
+; E_PARSE - compile-time parse errors
+; E_NOTICE - run-time notices (these are warnings which often result
+; from a bug in your code, but it's possible that it was
+; intentional (e.g., using an uninitialized variable and
+; relying on the fact it is automatically initialized to an
+; empty string)
+; E_STRICT - run-time notices, enable to have PHP suggest changes
+; to your code which will ensure the best interoperability
+; and forward compatibility of your code
+; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
+; initial startup
+; E_COMPILE_ERROR - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR - user-generated error message
+; E_USER_WARNING - user-generated warning message
+; E_USER_NOTICE - user-generated notice message
+; E_DEPRECATED - warn about code that will not work in future versions
+; of PHP
+; E_USER_DEPRECATED - user-generated deprecation warnings
+;
+; Common Values:
+; E_ALL (Show all errors, warnings and notices including coding standards.)
+; E_ALL & ~E_NOTICE (Show all errors, except for notices)
+; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
+; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
+; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
+; Development Value: E_ALL
+; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
+; http://php.net/error-reporting
+error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
+
+; This directive controls whether or not and where PHP will output errors,
+; notices and warnings too. Error output is very useful during development, but
+; it could be very dangerous in production environments. Depending on the code
+; which is triggering the error, sensitive information could potentially leak
+; out of your application such as database usernames and passwords or worse.
+; For production environments, we recommend logging errors rather than
+; sending them to STDOUT.
+; Possible Values:
+; Off = Do not display any errors
+; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
+; On or stdout = Display errors to STDOUT
+; Default Value: On
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-errors
+display_errors = On
+
+; The display of errors which occur during PHP's startup sequence are handled
+; separately from display_errors. PHP's default behavior is to suppress those
+; errors from clients. Turning the display of startup errors on can be useful in
+; debugging configuration problems. We strongly recommend you
+; set this to 'off' for production servers.
+; Default Value: Off
+; Development Value: On
+; Production Value: Off
+; http://php.net/display-startup-errors
+display_startup_errors = Off
+
+; Besides displaying errors, PHP can also log errors to locations such as a
+; server-specific log, STDERR, or a location specified by the error_log
+; directive found below. While errors should not be displayed on productions
+; servers they should still be monitored and logging is a great way to do that.
+; Default Value: Off
+; Development Value: On
+; Production Value: On
+; http://php.net/log-errors
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+; http://php.net/log-errors-max-len
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line unless ignore_repeated_source is set true.
+; http://php.net/ignore-repeated-errors
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting
+; is On you will not log errors with repeated messages from different files or
+; source lines.
+; http://php.net/ignore-repeated-source
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This is only effective in a debug compile, and if
+; error reporting includes E_WARNING in the allowed list
+; http://php.net/report-memleaks
+report_memleaks = On
+
+; This setting is on by default.
+;report_zend_debug = 0
+
+; Store the last error/warning message in $php_errormsg (boolean). Setting this value
+; to On can assist in debugging and is appropriate for development servers. It should
+; however be disabled on production servers.
+; This directive is DEPRECATED.
+; Default Value: Off
+; Development Value: Off
+; Production Value: Off
+; http://php.net/track-errors
+;track_errors = Off
+
+; Turn off normal error reporting and emit XML-RPC error XML
+; http://php.net/xmlrpc-errors
+;xmlrpc_errors = 0
+
+; An XML-RPC faultCode
+;xmlrpc_error_number = 0
+
+; When PHP displays or logs an error, it has the capability of formatting the
+; error message as HTML for easier reading. This directive controls whether
+; the error message is formatted as HTML or not.
+; Note: This directive is hardcoded to Off for the CLI SAPI
+; http://php.net/html-errors
+;html_errors = On
+
+; If html_errors is set to On *and* docref_root is not empty, then PHP
+; produces clickable error messages that direct to a page describing the error
+; or function causing the error in detail.
+; You can download a copy of the PHP manual from http://php.net/docs
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including
+; the dot. PHP's default behavior is to leave these settings empty, in which
+; case no links to documentation are generated.
+; Note: Never use this feature for production boxes.
+; http://php.net/docref-root
+; Examples
+;docref_root = "/phpmanual/"
+
+; http://php.net/docref-ext
+;docref_ext = .html
+
+; String to output before an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-prepend-string
+; Example:
+;error_prepend_string = ""
+
+; String to output after an error message. PHP's default behavior is to leave
+; this setting blank.
+; http://php.net/error-append-string
+; Example:
+;error_append_string = ""
+
+; Log errors to specified file. PHP's default behavior is to leave this value
+; empty.
+; http://php.net/error-log
+; Example:
+;error_log = php_errors.log
+; Log errors to syslog (Event Log on Windows).
+;error_log = syslog
+
+; The syslog ident is a string which is prepended to every message logged
+; to syslog. Only used when error_log is set to syslog.
+;syslog.ident = php
+
+; The syslog facility is used to specify what type of program is logging
+; the message. Only used when error_log is set to syslog.
+;syslog.facility = user
+
+; Set this to disable filtering control characters (the default).
+; Some loggers only accept NVT-ASCII, others accept anything that's not
+; control characters. If your logger accepts everything, then no filtering
+; is needed at all.
+; Allowed values are:
+; ascii (all printable ASCII characters and NL)
+; no-ctrl (all characters except control characters)
+; all (all characters)
+; raw (like "all", but messages are not split at newlines)
+; http://php.net/syslog.filter
+;syslog.filter = ascii
+
+;windows.show_crt_warning
+; Default value: 0
+; Development value: 0
+; Production value: 0
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+
+; The separator used in PHP generated URLs to separate arguments.
+; PHP's default setting is "&".
+; http://php.net/arg-separator.output
+; Example:
+;arg_separator.output = "&"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; PHP's default setting is "&".
+; NOTE: Every character in this directive is considered as separator!
+; http://php.net/arg-separator.input
+; Example:
+;arg_separator.input = ";&"
+
+; This directive determines which super global arrays are registered when PHP
+; starts up. G,P,C,E & S are abbreviations for the following respective super
+; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
+; paid for the registration of these arrays and because ENV is not as commonly
+; used as the others, ENV is not recommended on productions servers. You
+; can still get access to the environment variables through getenv() should you
+; need to.
+; Default Value: "EGPCS"
+; Development Value: "GPCS"
+; Production Value: "GPCS";
+; http://php.net/variables-order
+variables_order = "GPCS"
+
+; This directive determines which super global data (G,P & C) should be
+; registered into the super global array REQUEST. If so, it also determines
+; the order in which that data is registered. The values for this directive
+; are specified in the same manner as the variables_order directive,
+; EXCEPT one. Leaving this value empty will cause PHP to use the value set
+; in the variables_order directive. It does not mean it will leave the super
+; globals array REQUEST empty.
+; Default Value: None
+; Development Value: "GP"
+; Production Value: "GP"
+; http://php.net/request-order
+request_order = "GP"
+
+; This directive determines whether PHP registers $argv & $argc each time it
+; runs. $argv contains an array of all the arguments passed to PHP when a script
+; is invoked. $argc contains an integer representing the number of arguments
+; that were passed when the script was invoked. These arrays are extremely
+; useful when running scripts from the command line. When this directive is
+; enabled, registering these variables consumes CPU cycles and memory each time
+; a script is executed. For performance reasons, this feature should be disabled
+; on production servers.
+; Note: This directive is hardcoded to On for the CLI SAPI
+; Default Value: On
+; Development Value: Off
+; Production Value: Off
+; http://php.net/register-argc-argv
+register_argc_argv = Off
+
+; When enabled, the ENV, REQUEST and SERVER variables are created when they're
+; first used (Just In Time) instead of when the script starts. If these
+; variables are not used within a script, having this directive on will result
+; in a performance gain. The PHP directive register_argc_argv must be disabled
+; for this directive to have any effect.
+; http://php.net/auto-globals-jit
+auto_globals_jit = On
+
+; Whether PHP will read the POST data.
+; This option is enabled by default.
+; Most likely, you won't want to disable this option globally. It causes $_POST
+; and $_FILES to always be empty; the only way you will be able to read the
+; POST data will be through the php://input stream wrapper. This can be useful
+; to proxy requests or to process the POST data in a memory efficient fashion.
+; http://php.net/enable-post-data-reading
+;enable_post_data_reading = Off
+
+; Maximum size of POST data that PHP will accept.
+; Its value may be 0 to disable the limit. It is ignored if POST data reading
+; is disabled through enable_post_data_reading.
+; http://php.net/post-max-size
+post_max_size = 8M
+
+; Automatically add files before PHP document.
+; http://php.net/auto-prepend-file
+auto_prepend_file =
+
+; Automatically add files after PHP document.
+; http://php.net/auto-append-file
+auto_append_file =
+
+; By default, PHP will output a media type using the Content-Type header. To
+; disable this, simply set it to be empty.
+;
+; PHP's built-in default media type is set to text/html.
+; http://php.net/default-mimetype
+default_mimetype = "text/html"
+
+; PHP's default character set is set to UTF-8.
+; http://php.net/default-charset
+default_charset = "UTF-8"
+
+; PHP internal character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/internal-encoding
+;internal_encoding =
+
+; PHP input character encoding is set to empty.
+; If empty, default_charset is used.
+; http://php.net/input-encoding
+;input_encoding =
+
+; PHP output character encoding is set to empty.
+; If empty, default_charset is used.
+; See also output_buffer.
+; http://php.net/output-encoding
+;output_encoding =
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"
+;include_path = ".:/usr/share/php"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+;
+; PHP's default setting for include_path is ".;/path/to/php/pear"
+; http://php.net/include-path
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues. The alternate is to use the
+; cgi.force_redirect configuration below
+; http://php.net/doc-root
+doc_root =
+
+; The directory under which PHP opens the script using /~username used only
+; if nonempty.
+; http://php.net/user-dir
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; http://php.net/extension-dir
+;extension_dir = "./"
+; On windows:
+;extension_dir = "ext"
+
+; Directory where the temporary files should be placed.
+; Defaults to the system default (see sys_get_temp_dir)
+;sys_temp_dir = "/tmp"
+
+; Whether or not to enable the dl() function. The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+; http://php.net/enable-dl
+enable_dl = Off
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers. Left undefined, PHP turns this on by default. You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; http://php.net/cgi.force-redirect
+;cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request. PHP's default behavior is to disable this feature.
+;cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution. Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; http://php.net/cgi.redirect-status-env
+;cgi.redirect_status_env =
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
+; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
+; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; http://php.net/cgi.fix-pathinfo
+;cgi.fix_pathinfo=1
+
+; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside
+; of the web tree and people will not be able to circumvent .htaccess security.
+;cgi.discard_path=1
+
+; FastCGI under IIS supports the ability to impersonate
+; security tokens of the calling client. This allows IIS to define the
+; security context that the request runs under. mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS. Default is zero.
+; http://php.net/fastcgi.impersonate
+;fastcgi.impersonate = 1
+
+; Disable logging through FastCGI connection. PHP's default behavior is to enable
+; this feature.
+;fastcgi.logging = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If set to 0, PHP sends Status: header that
+; is supported by Apache. When this option is set to 1, PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+; http://php.net/cgi.rfc2616-headers
+;cgi.rfc2616_headers = 0
+
+; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #!
+; (shebang) at the top of the running script. This line might be needed if the
+; script support running both as stand-alone script and via PHP CGI<. PHP in CGI
+; mode skips this line and ignores its content if this directive is turned on.
+; http://php.net/cgi.check-shebang-line
+;cgi.check_shebang_line=1
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+; http://php.net/file-uploads
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+; http://php.net/upload-tmp-dir
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+; http://php.net/upload-max-filesize
+upload_max_filesize = 2M
+
+; Maximum number of files that can be uploaded via a single request
+max_file_uploads = 20
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-fopen
+allow_url_fopen = On
+
+; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
+; http://php.net/allow-url-include
+allow_url_include = Off
+
+; Define the anonymous ftp password (your email address). PHP's default setting
+; for this is empty.
+; http://php.net/from
+;from="john@doe.com"
+
+; Define the User-Agent string. PHP's default setting for this is empty.
+; http://php.net/user-agent
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+; http://php.net/default-socket-timeout
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; http://php.net/auto-detect-line-endings
+;auto_detect_line_endings = Off
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+; extension=modulename
+;
+; For example:
+;
+; extension=mysqli
+;
+; When the extension library to load is not located in the default extension
+; directory, You may specify an absolute path to the library file:
+;
+; extension=/path/to/extension/mysqli.so
+;
+; Note : The syntax used in previous PHP versions ('extension=.so' and
+; 'extension='php_.dll') is supported for legacy reasons and may be
+; deprecated in a future PHP major version. So, when it is possible, please
+; move to the new ('extension=) syntax.
+;
+; Notes for Windows environments :
+;
+; - Many DLL files are located in the extensions/ (PHP 4) or ext/ (PHP 5+)
+; extension folders as well as the separate PECL DLL download (PHP 5+).
+; Be sure to appropriately set the extension_dir directive.
+;
+;extension=bz2
+;extension=curl
+;extension=ffi
+;extension=ftp
+;extension=fileinfo
+;extension=gd2
+;extension=gettext
+;extension=gmp
+;extension=intl
+;extension=imap
+;extension=ldap
+;extension=mbstring
+;extension=exif ; Must be after mbstring as it depends on it
+;extension=mysqli
+;extension=oci8_12c ; Use with Oracle Database 12c Instant Client
+;extension=odbc
+;extension=openssl
+;extension=pdo_firebird
+;extension=pdo_mysql
+;extension=pdo_oci
+;extension=pdo_odbc
+;extension=pdo_pgsql
+;extension=pdo_sqlite
+;extension=pgsql
+;extension=shmop
+
+; The MIBS data available in the PHP distribution must be installed.
+; See http://www.php.net/manual/en/snmp.installation.php
+;extension=snmp
+
+;extension=soap
+;extension=sockets
+;extension=sodium
+;extension=sqlite3
+;extension=tidy
+;extension=xmlrpc
+;extension=xsl
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[CLI Server]
+; Whether the CLI web server uses ANSI color coding in its terminal output.
+cli_server.color = On
+
+[Date]
+; Defines the default timezone used by the date functions
+; http://php.net/date.timezone
+;date.timezone =
+
+; http://php.net/date.default-latitude
+;date.default_latitude = 31.7667
+
+; http://php.net/date.default-longitude
+;date.default_longitude = 35.2333
+
+; http://php.net/date.sunrise-zenith
+;date.sunrise_zenith = 90.583333
+
+; http://php.net/date.sunset-zenith
+;date.sunset_zenith = 90.583333
+
+[filter]
+; http://php.net/filter.default
+;filter.default = unsafe_raw
+
+; http://php.net/filter.default-flags
+;filter.default_flags =
+
+[iconv]
+; Use of this INI entry is deprecated, use global input_encoding instead.
+; If empty, default_charset or input_encoding or iconv.input_encoding is used.
+; The precedence is: default_charset < input_encoding < iconv.input_encoding
+;iconv.input_encoding =
+
+; Use of this INI entry is deprecated, use global internal_encoding instead.
+; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
+; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
+;iconv.internal_encoding =
+
+; Use of this INI entry is deprecated, use global output_encoding instead.
+; If empty, default_charset or output_encoding or iconv.output_encoding is used.
+; The precedence is: default_charset < output_encoding < iconv.output_encoding
+; To use an output encoding conversion, iconv's output handler must be set
+; otherwise output encoding conversion cannot be performed.
+;iconv.output_encoding =
+
+[imap]
+; rsh/ssh logins are disabled by default. Use this INI entry if you want to
+; enable them. Note that the IMAP library does not filter mailbox names before
+; passing them to rsh/ssh command, thus passing untrusted data to this function
+; with rsh/ssh enabled is insecure.
+;imap.enable_insecure_rsh=0
+
+[intl]
+;intl.default_locale =
+; This directive allows you to produce PHP errors when some error
+; happens within intl functions. The value is the level of the error produced.
+; Default is 0, which does not produce any errors.
+;intl.error_level = E_WARNING
+;intl.use_exceptions = 0
+
+[sqlite3]
+; Directory pointing to SQLite3 extensions
+; http://php.net/sqlite3.extension-dir
+;sqlite3.extension_dir =
+
+; SQLite defensive mode flag (only available from SQLite 3.26+)
+; When the defensive flag is enabled, language features that allow ordinary
+; SQL to deliberately corrupt the database file are disabled. This forbids
+; writing directly to the schema, shadow tables (eg. FTS data tables), or
+; the sqlite_dbpage virtual table.
+; https://www.sqlite.org/c3ref/c_dbconfig_defensive.html
+; (for older SQLite versions, this flag has no use)
+;sqlite3.defensive = 1
+
+[Pcre]
+; PCRE library backtracking limit.
+; http://php.net/pcre.backtrack-limit
+;pcre.backtrack_limit=100000
+
+; PCRE library recursion limit.
+; Please note that if you set this value to a high number you may consume all
+; the available process stack and eventually crash PHP (due to reaching the
+; stack size limit imposed by the Operating System).
+; http://php.net/pcre.recursion-limit
+;pcre.recursion_limit=100000
+
+; Enables or disables JIT compilation of patterns. This requires the PCRE
+; library to be compiled with JIT support.
+;pcre.jit=1
+
+[Pdo]
+; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
+; http://php.net/pdo-odbc.connection-pooling
+;pdo_odbc.connection_pooling=strict
+
+;pdo_odbc.db2_instance_name
+
+[Pdo_mysql]
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+pdo_mysql.default_socket=
+
+[Phar]
+; http://php.net/phar.readonly
+;phar.readonly = On
+
+; http://php.net/phar.require-hash
+;phar.require_hash = On
+
+;phar.cache_list =
+
+[mail function]
+; For Win32 only.
+; http://php.net/smtp
+SMTP = localhost
+; http://php.net/smtp-port
+smtp_port = 25
+
+; For Win32 only.
+; http://php.net/sendmail-from
+;sendmail_from = me@example.com
+
+; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
+; http://php.net/sendmail-path
+;sendmail_path =
+
+; Force the addition of the specified parameters to be passed as extra parameters
+; to the sendmail binary. These parameters will always replace the value of
+; the 5th parameter to mail().
+;mail.force_extra_parameters =
+
+; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
+mail.add_x_header = Off
+
+; The path to a log file that will log all mail() calls. Log entries include
+; the full path of the script, line number, To address and headers.
+;mail.log =
+; Log mail to syslog (Event Log on Windows).
+;mail.log = syslog
+
+[ODBC]
+; http://php.net/odbc.default-db
+;odbc.default_db = Not yet implemented
+
+; http://php.net/odbc.default-user
+;odbc.default_user = Not yet implemented
+
+; http://php.net/odbc.default-pw
+;odbc.default_pw = Not yet implemented
+
+; Controls the ODBC cursor model.
+; Default: SQL_CURSOR_STATIC (default).
+;odbc.default_cursortype
+
+; Allow or prevent persistent links.
+; http://php.net/odbc.allow-persistent
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+; http://php.net/odbc.check-persistent
+odbc.check_persistent = On
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/odbc.max-persistent
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent). -1 means no limit.
+; http://php.net/odbc.max-links
+odbc.max_links = -1
+
+; Handling of LONG fields. Returns number of bytes to variables. 0 means
+; passthru.
+; http://php.net/odbc.defaultlrl
+odbc.defaultlrl = 4096
+
+; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of odbc.defaultlrl and odbc.defaultbinmode
+; http://php.net/odbc.defaultbinmode
+odbc.defaultbinmode = 1
+
+[MySQLi]
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/mysqli.max-persistent
+mysqli.max_persistent = -1
+
+; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
+; http://php.net/mysqli.allow_local_infile
+;mysqli.allow_local_infile = On
+
+; Allow or prevent persistent links.
+; http://php.net/mysqli.allow-persistent
+mysqli.allow_persistent = On
+
+; Maximum number of links. -1 means no limit.
+; http://php.net/mysqli.max-links
+mysqli.max_links = -1
+
+; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
+; at MYSQL_PORT.
+; http://php.net/mysqli.default-port
+mysqli.default_port = 3306
+
+; Default socket name for local MySQL connects. If empty, uses the built-in
+; MySQL defaults.
+; http://php.net/mysqli.default-socket
+mysqli.default_socket =
+
+; Default host for mysqli_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-host
+mysqli.default_host =
+
+; Default user for mysqli_connect() (doesn't apply in safe mode).
+; http://php.net/mysqli.default-user
+mysqli.default_user =
+
+; Default password for mysqli_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
+; and reveal this password! And of course, any users with read access to this
+; file will be able to reveal the password as well.
+; http://php.net/mysqli.default-pw
+mysqli.default_pw =
+
+; Allow or prevent reconnect
+mysqli.reconnect = Off
+
+[mysqlnd]
+; Enable / Disable collection of general statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+mysqlnd.collect_statistics = On
+
+; Enable / Disable collection of memory usage statistics by mysqlnd which can be
+; used to tune and monitor MySQL operations.
+mysqlnd.collect_memory_statistics = Off
+
+; Records communication from all extensions using mysqlnd to the specified log
+; file.
+; http://php.net/mysqlnd.debug
+;mysqlnd.debug =
+
+; Defines which queries will be logged.
+;mysqlnd.log_mask = 0
+
+; Default size of the mysqlnd memory pool, which is used by result sets.
+;mysqlnd.mempool_default_size = 16000
+
+; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
+;mysqlnd.net_cmd_buffer_size = 2048
+
+; Size of a pre-allocated buffer used for reading data sent by the server in
+; bytes.
+;mysqlnd.net_read_buffer_size = 32768
+
+; Timeout for network requests in seconds.
+;mysqlnd.net_read_timeout = 31536000
+
+; SHA-256 Authentication Plugin related. File with the MySQL server public RSA
+; key.
+;mysqlnd.sha256_server_public_key =
+
+[OCI8]
+
+; Connection: Enables privileged connections using external
+; credentials (OCI_SYSOPER, OCI_SYSDBA)
+; http://php.net/oci8.privileged-connect
+;oci8.privileged_connect = Off
+
+; Connection: The maximum number of persistent OCI8 connections per
+; process. Using -1 means no limit.
+; http://php.net/oci8.max-persistent
+;oci8.max_persistent = -1
+
+; Connection: The maximum number of seconds a process is allowed to
+; maintain an idle persistent connection. Using -1 means idle
+; persistent connections will be maintained forever.
+; http://php.net/oci8.persistent-timeout
+;oci8.persistent_timeout = -1
+
+; Connection: The number of seconds that must pass before issuing a
+; ping during oci_pconnect() to check the connection validity. When
+; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
+; pings completely.
+; http://php.net/oci8.ping-interval
+;oci8.ping_interval = 60
+
+; Connection: Set this to a user chosen connection class to be used
+; for all pooled server requests with Oracle 11g Database Resident
+; Connection Pooling (DRCP). To use DRCP, this value should be set to
+; the same string for all web servers running the same application,
+; the database pool must be configured, and the connection string must
+; specify to use a pooled server.
+;oci8.connection_class =
+
+; High Availability: Using On lets PHP receive Fast Application
+; Notification (FAN) events generated when a database node fails. The
+; database must also be configured to post FAN events.
+;oci8.events = Off
+
+; Tuning: This option enables statement caching, and specifies how
+; many statements to cache. Using 0 disables statement caching.
+; http://php.net/oci8.statement-cache-size
+;oci8.statement_cache_size = 20
+
+; Tuning: Enables statement prefetching and sets the default number of
+; rows that will be fetched automatically after statement execution.
+; http://php.net/oci8.default-prefetch
+;oci8.default_prefetch = 100
+
+; Compatibility. Using On means oci_close() will not close
+; oci_connect() and oci_new_connect() connections.
+; http://php.net/oci8.old-oci-close-semantics
+;oci8.old_oci_close_semantics = Off
+
+[PostgreSQL]
+; Allow or prevent persistent links.
+; http://php.net/pgsql.allow-persistent
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect().
+; Auto reset feature requires a little overheads.
+; http://php.net/pgsql.auto-reset-persistent
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links. -1 means no limit.
+; http://php.net/pgsql.max-persistent
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent). -1 means no limit.
+; http://php.net/pgsql.max-links
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+; http://php.net/pgsql.ignore-notice
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Notice message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+; http://php.net/pgsql.log-notice
+pgsql.log_notice = 0
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+; http://php.net/bcmath.scale
+bcmath.scale = 0
+
+[browscap]
+; http://php.net/browscap
+;browscap = extra/browscap.ini
+
+[Session]
+; Handler used to store/retrieve data.
+; http://php.net/session.save-handler
+session.save_handler = files
+
+; Argument passed to save_handler. In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this
+; variable in order to use PHP's session functions.
+;
+; The path can be defined as:
+;
+; session.save_path = "N;/path"
+;
+; where N is an integer. Instead of storing all the session files in
+; /path, what this will do is use subdirectories N-levels deep, and
+; store the session data in those directories. This is useful if
+; your OS has problems with many files in one directory, and is
+; a more efficient layout for servers that handle many sessions.
+;
+; NOTE 1: PHP will not create this directory structure automatically.
+; You can use the script in the ext/session dir for that purpose.
+; NOTE 2: See the section on garbage collection below if you choose to
+; use subdirectories for session storage
+;
+; The file storage module creates files using mode 600 by default.
+; You can change that by using
+;
+; session.save_path = "N;MODE;/path"
+;
+; where MODE is the octal representation of the mode. Note that this
+; does not overwrite the process's umask.
+; http://php.net/session.save-path
+;session.save_path = "/var/lib/php/sessions"
+
+; Whether to use strict session mode.
+; Strict session mode does not accept an uninitialized session ID, and
+; regenerates the session ID if the browser sends an uninitialized session ID.
+; Strict mode protects applications from session fixation via a session adoption
+; vulnerability. It is disabled by default for maximum compatibility, but
+; enabling it is encouraged.
+; https://wiki.php.net/rfc/strict_sessions
+session.use_strict_mode = 0
+
+; Whether to use cookies.
+; http://php.net/session.use-cookies
+session.use_cookies = 1
+
+; http://php.net/session.cookie-secure
+;session.cookie_secure =
+
+; This option forces PHP to fetch and use a cookie for storing and maintaining
+; the session id. We encourage this operation as it's very helpful in combating
+; session hijacking when not specifying and managing your own session id. It is
+; not the be-all and end-all of session hijacking defense, but it's a good start.
+; http://php.net/session.use-only-cookies
+session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+; http://php.net/session.name
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+; http://php.net/session.auto-start
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+; http://php.net/session.cookie-lifetime
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+; http://php.net/session.cookie-path
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+; http://php.net/session.cookie-domain
+session.cookie_domain =
+
+; Whether or not to add the httpOnly flag to the cookie, which makes it
+; inaccessible to browser scripting languages such as JavaScript.
+; http://php.net/session.cookie-httponly
+session.cookie_httponly =
+
+; Add SameSite attribute to cookie to help mitigate Cross-Site Request Forgery (CSRF/XSRF)
+; Current valid values are "Strict", "Lax" or "None". When using "None",
+; make sure to include the quotes, as `none` is interpreted like `false` in ini files.
+; https://tools.ietf.org/html/draft-west-first-party-cookies-07
+session.cookie_samesite =
+
+; Handler used to serialize data. php is the standard serializer of PHP.
+; http://php.net/session.serialize-handler
+session.serialize_handler = php
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using gc_probability/gc_divisor,
+; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
+; Default Value: 1
+; Development Value: 1
+; Production Value: 1
+; http://php.net/session.gc-probability
+session.gc_probability = 0
+
+; Defines the probability that the 'garbage collection' process is started on every
+; session initialization. The probability is calculated by using gc_probability/gc_divisor,
+; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
+; For high volume production servers, using a value of 1000 is a more efficient approach.
+; Default Value: 100
+; Development Value: 1000
+; Production Value: 1000
+; http://php.net/session.gc-divisor
+session.gc_divisor = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+; http://php.net/session.gc-maxlifetime
+session.gc_maxlifetime = 1440
+
+; NOTE: If you are using the subdirectory option for storing session files
+; (see session.save_path above), then garbage collection does *not*
+; happen automatically. You will need to do your own garbage
+; collection through a shell script, cron entry, or some other method.
+; For example, the following script is the equivalent of setting
+; session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
+; find /path/to/sessions -cmin +24 -type f | xargs rm
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+; http://php.net/session.referer-check
+session.referer_check =
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects
+; or leave this empty to avoid sending anti-caching headers.
+; http://php.net/session.cache-limiter
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+; http://php.net/session.cache-expire
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users' security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+; to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+; in publicly accessible computer.
+; - User may access your site with the same session ID
+; always using URL stored in browser's history or bookmarks.
+; http://php.net/session.use-trans-sid
+session.use_trans_sid = 0
+
+; Set session ID character length. This value could be between 22 to 256.
+; Shorter length than default is supported only for compatibility reason.
+; Users should use 32 or more chars.
+; http://php.net/session.sid-length
+; Default Value: 32
+; Development Value: 26
+; Production Value: 26
+session.sid_length = 26
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+;